The LTC1482IN8 is a low power RS485 compatible transceiver that offers an active low carrier detect output. The open-drain carrier detect pin allows several transceivers to share the same carrier detect line and can be used to detect the insertion or removal of a driven RS485/RS422 cable.
Enhanced ESD protection allows the LTC1482IN8 to withstand ±15kV (human body model), IEC-1000-4-2 level 4 (±8kV) contact and level 3 (±8kV) air discharge ESD without latchup or damage.
The LTC1482IN8 receiver stays alive at all times except in shutdown. The supply current is a maximum of 700µA and 900µA when the driver is disabled and enabled respectively. In shutdown, the quiescent current of the LTC1482IN8 drops to a maximum of 20µA.
When the driver is disabled or the LTC1482IN8 is in shutdown, the driver outputs are three-stated and remain in a high impedance state over the RS485 common mode range.
Excessive power dissipation caused by bus contention or faults is prevented by a thermal shutdown circuit, which forces the driver outputs into a high impedance state.
The LTC1482IN8 is fully specified over the commercial and industrial temperature ranges and is available in 8-lead MSOP, PDIP and SO packages.
Feature
- No Damage or Latchup to ±15kV (Human Body Model), IEC1000-4-2 Level 4 (±8kV) Contact and Level 3 (±8kV) Air Discharge
- Active Low Carrier Detect Output
- Guaranteed High Receiver Output State for Floating, Shorted or Terminated Inputs with No Signal Present
- Drives Low Cost Residential Telephone Wires
- Low Power: ICC = 700µA Max with Driver Disabled
- ICC = 900µA Max in Driver Mode Without Load
- 20µA Max Quiescent Current in Shutdown Mode
- Single 5V Supply
- –7V to 12V Common Mode Range Permits ±7V Ground Difference Between Devices on the Data Line
- Maximum Data Rate of 4Mbps
- Power Up/Down Glitch-Free Driver Outputs
- Up to 32 Transceivers on the Bus
- Available in 8-Lead MSOP, PDIP and SO Packages
Applications
- Battery-Powered RS485/RS422 Applications
- Low Power RS485/RS422 Transceiver
- Level Translator
(Picture: Pinout)
