The ADP320ACPZ331815R7 200 mA triple output LDO combines high PSRR, lownoise, low quiescent current, and low dropout voltage in a voltageregulator ideally suited for wireless applications with demandingperformance and board space requirements.
The low quiescent current, low dropout voltage, and wide inputvoltage range of the ADP320ACPZ331815R7 triple LDO extend the battery life ofportable devices. The ADP320ACPZ331815R7 triple LDO maintains power supplyrejection greater than 60 dB for frequencies as high as 100 kHzwhile operating with a low headroom voltage. The ADP320ACPZ331815R7 tripleLDO offers much lower noise performance than competing LDOswithout the need for a noise bypass capacitor.
The ADP320ACPZ331815R7 triple LDO is available in a miniature 16-lead 3 mm ×3 mm LFCSP package and is stable with tiny 1 µF ±30% ceramic outputcapacitors, resulting in the smallest possible board area for a widevariety of portable power needs.
The ADP320ACPZ331815R7 triple LDO is available in output voltage combinationsranging from 0.8 V to 3.3 V and offers over current andthermal protection to prevent damage in adverse conditions.
Feature
- Bias voltage range (VBIAS): 2.5 V to 5.5 V
- LDO input voltage range (VIN1/VIN2, VIN3): 1.8 V to 5.5 V
- Three 200 mA low dropout voltage regulators
- 16-lead, 3 mm × 3 mm LFCSP
- Initial accuracy: ±1%
- Stable with 1 µF ceramic output capacitors
- No noise bypass capacitor required
- 3 independent logic controlled enables
- Over current and thermal protection
- High PSRR
- 76 dB PSRR up to 1 kHz
- 70 dB PSRR 10 kHz
- 60 dB PSRR at 100 kHz
- 40 dB PSRR at 1 MHz
- Low output noise
- 24 µV rms typical output noise at VOUT = 1.2 V
- 43 µV rms typical output noise at VOUT = 2.8 V
- Excellent transient response
- Low dropout voltage: 110 mV @ 200 mA load
- 85 µA typical ground current at no load, all LDOs enabled
- 100 µs fast turn-on circuit
- Guaranteed 200 mA output current per regulator
- −40°C to +125°C junction temperature
Applications
- Mobile phones
- Digital cameras and audio devices
- Portable and battery-powered equipment
- Portable medical devices
- Post dc-to-dc regulation
(Picture: Pinout)
