/ swap region (128 kbytes) / //#define REGION_SWAP_START 0x08020000 //#define REGION_SWAP_END 0x0803FFFF

define REGION_SWAP_START (EXTERNAL_FLASH_ADDRESS + 0x300000)

define REGION_SWAP_END (REGION_SWAP_START + FWIMG_SIZE - 1)

/ slot 0 region (128 kbytes) 128+64=192KB /

define REGION_SLOT_0_START 0x08020000

define REGION_SLOT_0_END (REGION_SLOT_0_START + FWIMG_SIZE - 1) //0x0804FFFF

/ slot 1 region (128 kbytes) /

define REGION_SLOT_1_START (REGION_SLOT_0_END + 1)//0x08050000

define REGION_SLOT_1_END (REGION_SLOT_1_START + FWIMG_SIZE - 1)//0x0807FFFF

之前配置交换分区SWAP，slot0, slot1 都是0x20000 byte大小，目前由于应用程序变大，想通过调整slot0, slot1的空间大小，缩小SWAP的空间，来实现支持较大应用程序存储，看文档说明SWAP可以多次交换，只要是几次能过完整包升级程序更新过来就可以了，但目前看存储参数对其这块还是不好分配，不能按照我在想的这样，SWAP 50K ，slot0 150K , slot1 150K 这样，想知道这块可以调整改变么，保证slot0 slot1 稍微大些，

= [SBOOT] System Security Check successfully passed. Starting... = [FWIMG] Slot #0 @: 802c000 / Slot #1 @: 8050000 / Swap @: 8020000 = [FWIMG] slot 0 (802c000) is not properly aligned: please tune your settingsFWIMG INIT COMPLETED ...