500-0771-01

FLIR's Lepton® 3 with radiometry is a complete long-wave infrared (LWIR) camera module designed to interface easily into native mobile-device interfaces and other consumer electronics. It captures infrared radiation input in its nominal response wavelength band (from 8 microns to 14 microns) and outputs a uniform thermal image with radiometry to provide absolute temperature measurements.<strong>Features:</strong> Integral shutter configuration: 11.5 mm x 12.7 mm x 6.9 mm (without socket), 11.8 mm x 12.7 mm x 7.2 mm (with socket), 56° HFOV, 71° diagonal (f/1.1 silicon doublet), LWIR sensor, wavelength 8 µm to 14 µm, Thermal sensitivity < 50 mK, Integrated digital thermal image processing functions, including automatic thermal environment compensation, noise filters, non-uniformity correction, and gain control, Radiometric accuracy (35°C blackbody) greater of: High gain: ±5°C @ 25°C, Low gain ±10°C @ 25°C, Radiometry software features for temp measurement including per pixel and frame radiometric output (Tlinear) and spotmeter, 160 (h) × 120 (v) active pixels, Export compliant frame rate (< 9 Hz) , SPI video interface, Two-wire I2C serial control interface, Uses standard cell phone-compatible power supplies: 2.8 V to sensor, 1.2 V to digital core, and flexible IO from 2.8 V to 3.1 V, Fast time to image (< 1.2 sec), Low operating power, nominal 140 mW < 150 mW overfull temp range, ~800 mW typ during shutter event, Low power shutdown mode (5 mW nominal), RoHS compliant, 32-pin socket interface to standard Molex or similar side-contact connector, Mobile phones, Gesture recognition, Building automation, Thermal imaging, Night vision