The AH1809-P-B is a low sensitivity, micropower Omnipolar Hall Effect switch IC designed forbattery powered consumer to industrial equipment such as smart e-meters. Based on two sensitive Hall Effect plates and a chopper stabilized architecture the AH1809-P-B provides a reliable solution over the whole operating range. To support portable and battery powered equipment the design has been optimized to operate over the supply range of 2.5V to 5.5V and consumes only 24uW with a supply of 3V.To minimize PCB space AH1809-P-B is also packaged in samll low profile package.The single open drain output can switched on with either a North or South pole of sufficient strength. When the magnetic flux density (B) perpendicular to the packageis larger than operate point (Bop) the output is switched on (pul°C low). The output is turned off when B becomes lower than the release point (Brp). The output will remain off when there is no magnetic field.The AH1809-P-B is available in a small low profile SOT553 and industry standard SC59 and SIP-3 packages.
Feature
Omnipolar (North or South pole) Operation Low Sensitivity Single Open Drain Output Micropower Operation 2.5V to 5.5V Operating Range Chopper Stabilized Design Provides Superior Temperature Stability Minimal Switch Point Drift Enhanced Immunity to Stress Good RF Noise Immunity -40℃ to +125℃ Operating Temperature High ESD Small Low Profile SOT553 and Industry Standard SC59 and SIP-3L Packages Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note 3)
