The MAX4400–MAX4403 low-cost, general-purpose op amps offer rail-to-rail outputs, draw only 320μA of quiescent current, and operate from a single +2.5V to +5.5V supply. For additional power conservation, the MAX4401 offers a low-power shutdown mode that reduces supply current to 1μA (max) and puts the amplifier's output in a high-impedance state. These devices deliver ±1.4mA of output current and are unity-gain stable with a 1MHz gain-bandwidth product driving capacitive loads up to 400pF. The MAX4400–MAX4403 are specified to +125°C, making them suitable for use in a variety of harsh environments, such as automotive applications.
The MAX44009EDT+ single amplifier is available in ultra-small 5-pin SC70 and space-saving 5-pin SOT23 packages. The single MAX4401 includes the shutdown feature and is available in a 6-pin SC70. The MAX4402 is a dual amplifier available in 8-pin SOT23, μMAX, and SO packages. The MAX4403 quad amplifier is packaged in a 14-pin TSSOP or SO.
Feature
- Single +2.5V to +5.5V Supply Voltage Range
- 320μA Quiescent Current per Amplifier
- 1μA (max) Shutdown Mode (MAX4401)
- Available in Space-Saving Packages
- 5-Pin SC70 (MAX4400)
- 6-Pin SC70 (MAX4401)
- 8-Pin SOT23/μMAX (MAX4402)
- 110dB AVOL with 2kΩ Load
- 0.015% THD with 2kΩ Load
- Rail-to-Rail Output Voltage Swing
- 1.4mA of Sink and Source Load Current
- Unity-Gain Stable up to CLOAD = 400pF
- Ground-Sensing Inputs
- AEC-Q100 Qualified (MAX4402AKA/V+ and MAX4402AUA/V+ Only)
Applications
- Automotive
- Electronic Ignition Modules
- Infrared Receivers
- Instruments and Terminals
- Portable Communications
- Sensor Signal Detection
- Single-Supply, Zero-Crossing Detectors
