The TPS53014DGS is a single, adaptive on-time D-CAP2 mode synchronous buck controller. The TPS53014DGS enablessystem designers to complete the suite of various end equipment’s power bus regulators with costeffective low external component count and low standby current solution. The main control loop forthe TPS53014DGS uses the D-CAP2 mode control which provides a very fast transient response with noexternal compensation components. The Adaptive on-time control supports seamless transition betweenPWM mode at higher load condition and Eco-modeoperation at light load. Eco-mode allows the TPS53014DGS to maintain high efficiency during lighterload conditions. The TPS53014DGS is also able to adapt to both low equivalent series resistance (ESR)output capacitors such as POSCAP or SP-CAP and ultra-low ESR ceramic capacitors. The deviceprovides convenient and efficient operation with input voltages from 4.5 V to 28 V and outputvoltage from 0.77 V to 7 V.
The TPS53014DGS is available in the 3-mm × 3-mm 10-pin VSSOP (DGS) package and is specifiedfor an ambient temperature range of –40°C to +85°C.
Feature
- D-CAP2 mode control
- Fast transient response
- No external parts required for loop compensation
- Compatible with ceramic output capacitors
- High initial reference accuracy (±1%)
- Wide input voltage range: 4.5 V to 28 V
- Output voltage range: 0.77 V to 7.0 V
- Low-side RDS(on) loss-less current sensing
- Adjustable soft start
- Non-sinking pre-biased soft start
- 500-kHz Switching frequency
- Cycle-by-cycle overcurrent limiting control
- Auto-Skip Eco-ModeTM for High Efficiency at Light load
- OCL/OVP/UVP/UVLO/TSD Protections
- Adaptive Gate Drivers with Integrated Boost PMOS Switch
- Thermally Compensated OCP, 4000 ppm/°C
- 10 pin VSSOP
