The LD1086D2TTR is a low drop voltage regulator capable of providing up to 1.5 A of output current. Dropout is guaranteed at a maximum of 1.2 V at the maximum output current, decreasing at lower loads. The LD1086D2TTR is pin-to-pin compatible with older 3-terminal adjustable regulators, but has better performance in terms of drop and output tolerance. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1086D2TTR quiescent current flows into the load, increasing efficiency. Only a 10 μF (minimum) capacitor is needed for stability. The device is available in a TO-220, D2PAK, D2PAK/A, DPAK or DFN8 (4x4) package. On-chip trimming allows the regulator to reach a very tight output voltage tolerance; within ± 1% at 25 °C. The LD1086D2TTR is available as automotive grade for adjustable output voltages in the TO-220 and DPAK packages. The PAT, SYL, SBL statistical tests have been performed, and the devices are qualified according to the AEC-Q100 specification for the automotive market in the temperature range of - 40 °C to 125 °C.
Feature
- Typicaldropout:1.3Vat1.5A
- Three-terminaladjustableorfixedoutputvoltage:1.8V,2.5V,3.3V,5V,12V
- Automotivegrade(adjustableVOUTinTO-220andDPAKpackagesonly)
- Outputcurrentguaranteedupto1.5A
- Outputtolerance:±1%at25°Cand±2%infulltemperaturerange
- Internalpowerandthermallimit
- Wideoperatingtemperaturerange-40°Cto125°C
- Packageavailable:TO-220,D2PAK,D2PAK/A,DPAKandDFN8(4x4)
- Pinoutcompatibilitywithstandardadjustablevoltageregulators
