The AD5530/AD5531 are single 12- and 14-bit (respectively) serial input, voltage output digital-to-analog converters (DAC).
They utilize a versatile 3-wire interface that is compatible with SPI®, QSPI™, MICROWIRE™, and DSP interface standards. Data is presented to the part in a 16-bit serial word format. Serial data is available on the SDO pin for daisy-chaining purposes. Data readback allows the user to read the contents of the DAC register via the SDO pin.
The DAC output is buffered by a gain of two amplifier and referenced to the potential at DUTGND. LDAC can be used to update the output of the DAC asynchronously. A power-down pin (PD) allows the DAC to be put into a low power state, and a CLR pin allows the output to be cleared to a user-defined voltage, the potential at DUTGND.
The AD5530/AD5531 are available in 16-lead TSSOP.
Feature
- 12-Bit CMOS DAC withOn-Chip Voltage Reference Output Amplifier -5 V to +5 V Output Range
- Serial Interface
- 300 kHz DAC Update Rate
- Small size: 8-Pin Mini-DIP
- Nonlinearlity: ±1/2 LSB Tmin to Tmax
- Low Power Dissipation: 100 mW Typ
Applications
- Industrial automation
- Automatic test equipment
- Process control
- General-purpose instrumentation
Data Sheet, Rev. B, 1/07
(Picture: Pinout)
