PIC18F26Q10-I/SS microcontrollers are optimized for robust, real time control and sensor nodes with integrated intelligent analog, configurable peripherals and 5V operation for increased noise immunity. They are well suited for a broad range of applications including industrial control, consumer, automotive, touch sensing and Internet of Things (IoT). These 28-pin devices deliver Core Independent Peripherals such as CLC, CWG, WWDT, CRC/Memory Scan, Hardware CVD, Zero-Cross Detect and Peripheral Pin Select, providing for increased design flexibility and lower system cost.
PIC18 Q10 Product Family Overview
Check out the code examples in MPLAB Xpress
Feature
- PIC18 Core with 83 Instructions, 31 Stack Levels
- Internal 64MHz oscillator
- Operating Voltage Range:- 1.8V – 5.5V
- Temperature Range:- Industrial Version (-40C to 85C)- Extended Version (-40C to 125C)
- 64 KB Flash Program Memory with self read/write capability
- 3615 Bytes Data SRAM Memory
- 1024 Bytes of EEPROM
- 24 x 10-bit ADC channels
- 1 x 5-bit DAC
- 8 x Configurable Logic Cell (CLC)
- 2 x Comparators
- Fixed Voltage Reference (FVR) module - 1.024V, 2.048V and 4.096V output levels
- Hardware Capacitive Voltage Divider (CVD) for mTouch buttons/sliders
- 1 x Zero-Cross Detect
- 1 x I2C/SPI
- 1 x EUSART with LIN support
- CRC with Memory Scan
- Windowed Watchdog Timer (WWDT)
- 1 x Hardware Limit Timer (HLT)
- 1 x Complementary Waveform Generator
- 2 x standalone 10-bit PWM modules
- 2 x Capture/Compare/PWM modules
- Three 8-bit Timers/Counters
- Four 16-bit Timers/Counters
- 1 x Hardware Limit Timer (HLT)
- Extended Watchdog Timer (WDT)
- Doze, Idle, and Sleep Power Saving Operating Modes
- Low Current Power-on Reset (POR)
- Brown-out Reset (BOR)
- Low-Power BOR (LPBOR)
- Peripheral Pin Select
- In-Circuit Debug Integrated On-Chip
- In-Circuit Serial Programing (ICSP) via Two Pins
