The Microchip SAM C series of 5V Cortex M0+devices is designed for industrial and commercial applications in noisyenvironments. These products feature robust communications peripheralsincluding the SERCOM module and CAN-FD, along with advanced motor controlperipherals, and the Peripheral Touch Control (PTC) for developing robust userinterfaces.
Supported by MPLAB X IDE and MPLAB Harmony.
Feature
- ARM Cortex-M0+ CPU running at up to 48MHz
- Single-cycle hardware multiplier
- Micro Trace Buffer
- Memory Protection Unit (MPU)
- 256KB in-system self-programmable Flash
- 8KB independent self-programmable Flash for EEPROM emulation
- 32KB SRAM Main Memory
- Power-on reset (POR) and brown-out detection (BOD)
- Internal and external clock options with 48MHz to 96MHz
- Fractional Digital Phase Locked Loop (FDPLL96M)
- 16 external interrupts
- One non-maskable interrupt
- Two-pin Serial Wire Debug (SWD) programming, test and debugging interface
- Idle, standby, and off sleep modes
- SleepWalking peripherals
- 6-channel Direct Memory Access Controller (DMAC)
- 6-channel Event System
- One 16-bit TC with compare/capture channels
- One 8-bit TC with compare/capture channels
- Hardware Divide and Square Root Accelerator (DIVAS)
- One 32-bit TC with compare/capture channels, by using two TCs
- Up to four compare channels with optional complementary output
- Generation of synchronized pulse width modulation (PWM) pattern across port pins
- Deterministic fault protection, fast decay and configurable dead-time between complementary outputs
- Dithering that increase resolution with up to 5 bit and reduce quantization error
- Frequency Meter
- 32-bit Real Time Counter (RTC) with clock/calendar function
- Watchdog Timer (WDT)
- CRC-32 generator
- USART with full-duplex and single-wire half-duplex configuration
- I2C up to 3.4MHz (Except SERCOM6 and SERCOM7)
- SPI
- LIN master/slave
- RS-485
- One Configurable Custom Logic (CCL)
- Differential and single-ended input
- Automatic offset and gain error compensation
- Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution
- Two Analog Comparators (AC) with window compare function
- Integrated Temperature Sensor
- Peripheral Touch Controller (PTC)
- 256-Channel capacitive touch and proximity sensing I/O
- Up to 38 programmable I/O pins
- Drop in compatible with select SAM D20 and SAM D21
- Operating Voltage
