Feature
-
MCU Core
- 80MHz/105DMIPS, 32-bit MIPS M4K Core
- USB 2.0 On-The-Go Peripheral with integrated PHY
- Dedicated DMA Channel for USB OTG
- 5 Stage pipeline, Harvard architecture
- MIPS16e mode for up to 40% smaller code size
- Single cycle multiply and hardware divide unit
- 32 x 32-bit Core Registers
- 32 x 32-bit Shadow Registers
- Fast context switch and interrupt response
- 128K Flash (plus 12K boot Flash)
- 32K RAM (can execute from RAM)
- Channel Hardware DMA Controller
- Flash prefetch module with 256 Byte cache
- Lock instructions or data in cache for fast access
- Programmable vector interrupt controller
- Fast and Accurate 16 channel 10-bit ADC,
- Max 1 Mega samples per second at +/- 1LSB, conversion available during SLEEP & IDLE
- RUN, IDLE, and SLEEP modes
- Multiple switchable clock modes for each power mode, enables optimum power settings
- 8 hardware breakpoints (6 Instruction and 2 Data)
- 2 wire programming and debugging interface
- JTAG interface supporting Programming, Debugging and Boundary scan
- Fail-Safe Clock Monitor – allows safe shutdown if clock fails
- Hardware RTCC (Real-Time Clock and Calendar with Alarms)
- 2 Internal oscillators (8MHz & 31KHz)
- Watchdog Timer with separate RC oscillator
- Pin compatible with 16-bit PIC® MCUs
