The CY7C65211-24LTXI is a full-speed USB Controller that enables seamless PC connectivity for peripherals with serial interfaces, such as UART, SPI and I²C. The CY7C65211 is also integrates CapSense and BCD compliant with the USB battery charging specification, Rev. 1.2. It integrates a voltage regulator, an oscillator and flash memory for storing configuration parameters, offering a cost-effective solution. CY7C65211 supports bus-powered and self-powered modes and enables efficient system power management with suspend and remote wake-up signals. It has a built-in USB 2.0 full-speed transceiver. The transceiver incorporates the internal USB series termination resistors on the USB data lines and a 1.5kR pull-up resistor on USBDP. It has a serial communication block (SCB). Each SCB can implement UART, SPI or I²C interface. A 256-byte buffer is available in both the TX and RX lines. The device supports UART hardware flow control.
Feature
- Integrated USB termination resistors
- Single-channel configurable UART interface
- Supports parity, overrun and framing errors
- Supports flow control using CTS, RTS, DTR, DSR
- GPIOs linked to CapSense buttons
- Supports bus-/self-powered configurations
- USB Suspend mode for low power
- Supports multi-master I²C
- General-purpose input/output (GPIO) pins