The MCP2518FDT-E/QBB is a cost-effective and small-footprint External CAN FDController that can be easily added to a microcontroller with an available SPIinterface. Therefore, a CAN FD channel can be easily added to amicrocontroller that is either lacking a CAN FD peripheral or that doesn't haveenough CAN FD channels.
The MCP2518FDT-E/QBB supports both CAN frames in the Classical format (CAN 2.0B)and CAN Flexible Data Rate (CAN FD) format as specified in ISO11898-1:2015.
Please see our MikroElektronika click Board! https://shop.mikroe.com/mcp2518fd-click
Please see our functional safety feature page CAN/CAN FD
Feature
- Conforms to ISO11898-1:2015
- Supports both CAN 2.0B and CAN FD
- Arbitration Bit Rate up to 1 Mbps
- Data Bit Rate up to 8 Mbps
- Up to 20MHz SPI Clock Speed
- Flexible FIFO setup
- 31 FIFOs configurable as transmit or receive
- 32 Flexible Filter and Mask Objects
- One Transmit Queue
- Misc
- 32-bit Time Stamp
- Bus Health Diagnostics and Error Counters
- Temperature Range: -40°C to +150°C
- Packages: VDFN14 (Wettable Flanks), SOIC14
- Low power consumption
- Low power mode current: 10uA, Max
- VDD: 2.7V-5.5V
- Active Current Max: 12mA @ 5.5V, 40 MHz CAN Clock
- Built-In Safety features
- Loopback mode
- SPI commands with CRC to detect noise on SPIinterface
- ECC for the SRAM 1 bit correction, 2 bit detection
