The MCP2022-500E/P provides a bidirectional, half-duplex communication physical interface to an automotive and industrial Local Interconnect (LIN) and SAE J2602 bus.Operation covers LIN Bus Specification Versions 1.3, 2.0, 2.1 and SAE J2602.The device incorporates a voltage regulator with 5V/50mA or 3.3V/50mA output.The regulator is short-circuit protected and also includes thermal shutdown.The regulator has been specifically designed to operate in the automotive environment and will survive reverse battery conditions, +43V load dump transients and double-battery jump starts.The device has been designed to meet the stringent quiescent current requirements of the automotive industry.The devices' very low emissions, excellent robustness to automotive transients and very high ESD robustness have been confirmed by independent test authorities.
Please consider this deviceMCP2022A
Feature
- Physical Layer Transceiver interface to support LIN Bus Specifications Version 1.3, 2.0, 2.1 and SAE J2602
- LIN Bus pin with internal pull-up resistor and diode protect against ground shorts and loss of ground
- Wake Up through LIN Bus activity (filtered) or LWAKE pin
- Thermal shutdown protection
- Built-in Voltage Regulator with wide operating voltage range up to 30V and regulation range from 5.5V to 18V
- Load dump protection up to 43V
- RESET Output
- MCP2022 available in 14-pin PDIP, SOIC and TSSOP packages -MCP2022-330 with 3.3V regulator -MCP2022-500 with 5V regulator
- Extended temperature range: -40°C to +125°C
- Automotive Qualification
- Physical Layer Transceiver interface to support LIN Bus Specifications Version 1.3, 2.0, 2.1 and SAE J2602
- LIN Bus pin with internal pull-up resistor and diode protect against ground shorts and loss of ground
- Wake Up through LIN Bus activity (filtered) or LWAKE pin
- Thermal shutdown protection
- Built-in Voltage Regulator with wide operating voltage range up to 30V and regulation range from 5.5V to 18V
- Load dump protection up to 43V
- MCP2022 available in 8-pin DPIP, SOIC and DFN packages
- MCP2022-330 with 3.3V regulator
- MCP2022-500 with 5V regulator
- Extended temperature range: -40°C to +125°C
- Automotive Qualification
