The AM26C32CN is a quadruple differential Line Receiver for balanced or unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active-high or active-low input. The 3-state outputs permit connection directly to a bus-organized system. Fail-safe design specifies that if the inputs are open, the outputs always are high. The AM26C32CN device is manufactured using a BiCMOS process, which is a combination of bipolar and CMOS transistors. This process provides the high voltage and current of bipolar with the low power of CMOS to reduce the power consumption to about one-fifth that of the standard AM26LS32, while maintaining AC and DC performance.
Feature
- Meets/exceeds requirements of ANSI TIA/EIA-422-B, TIA/EIA-423-B & ITU recommendation V.10/V.11
- 10mA Typical low power
- ±7V Common-mode range with ±200mV sensitivity
- 60mV Typical input hysteresis
- 3 State outputs
- Input fail-safe circuitry
- Available in Q-Temp automotive
- 17ns Typical tpd
- 2kV ESD
- 10Mbps Signalling rate
