Feature
- Single-chip Ethernet physical layer transceiver (PHY)
- ESD protection levels of ±8kV HBM without external protection devices
- ESD protection levels of EN/IEC61000-4-2
- Comprehensive flexPWR® technology
- Flexible power management architecture
- +1.6 to +3.6V LVCMOS variable I/O voltage range
- Integrated 3.3V to 1.8V regulator for optional single supply operation
- Regulator can be disabled if 1.8V system supply
- Performs HP Auto-MDIX in accordance with IEEE 802.3ab specification
- Cable length greater than 150m
- Automatic polarity correction
- Latch-up performance exceeds 150mA per EIA/JESD 78, class II
- Energy detect power-down mode
- Low current consumption power-down mode
- Low operating current consumption
- 39mA Typical in 10BASE-T and 79mA typical in 100BASE-TX mode
- Supports auto-negotiation and parallel detection
- Supports the media independent interface (MII) and reduced media independent interface (RMII)
- Compliant with IEEE 802.3-2005 standards - MII pins tolerant to 3.6V
- IEEE 802.3-2005 compliant register functions
Applications
- Set-Top Boxes
- Network Printers and Servers
- LAN on Motherboard
- 10/100 PCMCIA/CardBus Applications
- Embedded Telecom Applications
- Video Record/Playback Systems
- Cable Modems/Routers
- DSL Modems/Routers
- Digital Video Recorders
- Personal Video Recorders
- IP and Video Phones
- Wireless Access Points
- Digital Televisions
- Digital Media Adaptors/Servers
- POS Terminals
- Automotive Networking
- Gaming Consoles
- Security Systems
- POE Applications
- Access Control