Infineon’s Mid-Range+ SBC features three low-drop voltage regulators with 5 V or 3.3 V output voltage options for microcontrollers, network transceivers, sensors, and other peripherals’ power supply. As communication interfaces, they incorporate one CAN transceiver, including partial networking option, flexible data-rate performance up to 5 Mbit/s, and up to two LIN transceivers.Block Diagrams <strong>Features:</strong> Integrated low-drop voltage regulator (5 V or 3.3 V up to 250 mA), Integrated low-drop voltage regulator (5 V up to 100 mA), protected for off-board usage, Voltage regulator (5 V, 3.3 V, or 1.8 V) with external PNP transistor, protected for off-board usage or load-sharing, 1 CAN transceiver supporting FD communication up to 5 Mbit/s featuring CAN partial networking and CAN FD tolerant mode according to ISO 11898 2:2016, 2 LIN transceivers LIN2.2/J2602, 4 high-side outputs 7 Ω typ., 2 HV GPIOs, 3 HV wake inputs, Interrupt, reset output, Integrated fail-safe functions: 3 fail-safe outputs, watchdog, fail-safe operating modes, 16-bit SPI for configuration and diagnostics, Voltage, current, and temperature protection and monitoring, Reduced system cost through low component count and small PCB footprint, Low-drop voltage regulators for on- and off-board supply, Wide supply input voltage and temperature range, High-performance network transceivers, Flexible number of integrated LIN transceivers, Very low quiescent current modes, Very small package supporting AOI, Pin and software compatibility among all family members, Excellent EMC and ESD performance meeting major car OEM requirements, Electronic control units (ECU) for body applications in automotive, Body control modules (BCM) and gateways, Heating, ventilation, and air conditioning (HVAC), Door, roof, tailgate, trailer, and closure modules, Passive keyless entry, passive start modules, Seat control modules
Feature
- Very low quiescent current consumption in Stop- and Sleep Mode
- Periodic Cyclic Wake in SBC Normal- and Stop Mode
- Periodic Cyclic Sense in SBC Normal-, Stop- and Sleep Mode
- Low-Drop Voltage Regulator 5V, 250mA
- Low-Drop Voltage Regulator 5V, 100mA, protected features for off-board usage
- Low-Drop Voltage Regulator, driving an external PNP transistor - 5V in load sharing configuration or 5V/3.3V in stand-alone configuration, protected features for off-board usage. Current limitation by shunt resistor (up to 350mA with 470mΩ external shunt resistor) in stand-alone configuration
- High-Speed CAN Transceiver:
– fully compliant to HS-CAN standard ISO 11898-2:2016
– supporting CAN FD communication up to 5 Mbps
- LIN Transceiver LIN 2.2a, J2602 with configurable TXD timeout feature and LIN Flash Mode
- Fully compliant to “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications” Revision 1.3, 2012-05-04
- Four High-Side Outputs 7Ω typ.
- Dedicated supply pin for High-Side Outputs
- Two General Purpose High-Voltage In- and Outputs (GPIOs) configurable as add. Fail Outputs, Wake Inputs,Low-Side switches or High-Side switches
- Three universal High-Voltage Wake Inputs for voltage level monitoring
- Alternate High-Voltage Measurement Function, e.g. for battery voltage sensing
- Configurable wake-up sources
- Reset Output
- Configurable timeout and window watchdog
- Up to three Fail Outputs (depending on configuration)
- Overtemperature and short circuit protection feature
- Wide supply input voltage and temperature range
- Software compatible to all SBC families TLE926x and TLE927x
- Green Product (RoHS compliant) & AEC Qualified
- PG-VQFN-48 leadless exposed-pad power package with Lead Tip Inspection (LTI) feature to support Automatic Optical Inspection (AOI)
