The MAX4198/MAX4199 low-power, rail-to-rail differential amplifiers are ideal for single-supply applications that benefit from a low 0.01% gain error. The MAX4198EUA is factory trimmed to a fixed gain of +1V/V, and the MAX4199 is trimmed to a fixed gain of +10V/V. Capable of operating from a single +2.7V to +7.5V supply or from dual ±1.35V to ±3.75V supplies, they consume only 42μA while achieving -3dB bandwidths of 175kHz (MAX4198) and 45kHz (MAX4199). These amplifiers feature a shutdown mode that reduces the supply current to 6.5μA. The MAX4198/MAX4199 can drive 5kΩ loads to within 100mV from each rail. The standard differential amplifier configurations provide common-mode rejection of 90dB for the MAX4198EUA and 110dB for the MAX4199. The input common-mode voltage range for the MAX4198EUA extends 100mV Beyond-the-Rails. The MAX4198/MAX4199 are offered in a space-saving 8-pin μMAX package. For complete micropower, rail-to-rail instrumentation amplifiers, see the MAX4194-MAX4197 data sheet.
Feature
- Low 0.01% Gain Error
- High Common-Mode Rejection: 110dB (MAX4199)
- 10μV Input Offset Voltage (MAX4199)
- 30μV Input Offset Voltage (MAX4198)
- +2.7V to +7.5V Single-Supply Operation
- 42μA Supply Current
- 175kHz (MAX4198) and 45kHz (MAX4199) -3dB Bandwidth
- 6.5μA Shutdown Current
- Rail-to-Rail Outputs Drive 5kΩ Loads
- Input Voltage Range Extends 100mV Beyond-the-Rails (MAX4198)
- Available in Space-Saving 8-Pin μMAX Package
Applications
- Current-Sense Amplifiers
- Data Acquisition
- Differential Voltage Amplification
- Instrumentation Amplifier Building Block
- Portable Battery-Powered Equipment
- Transducer Interface