The LTC6246/LTC6247/LTC6248 are single/dual/quad low power, high speed unity gain stable rail-to-rail input/output operational amplifiers. On only 1mA of supply current they feature an impressive 180MHz gain-bandwidth product, 90V/μs slew rate and a low 4.2nV/√Hz of input-referred noise. The combination of high bandwidth, high slew rate, low power consumption and low broadband noise makes these amplifiers unique among rail-to-rail input/output op amps with similar supply currents. They are ideal for lower supply voltage high speed signal conditioning systems.
The LTC6246IS6 family maintains high efficiency performance from supply voltage levels of 2.5V to 5.25V and is fully specified at supplies of 2.7V and 5.0V.
For applications that require power-down, the LTC6246IS6 and the LTC6247 in MS10 offer a shutdown pin which disables the amplifier and reduces current consumption to 42μA.
The LTC6246IS6 family can be used as a plug-in replacement for many commercially available op amps to reduce power or to improve input/output range and performance.
Feature
- Gain Bandwidth Product: 180MHz
- –3dB Frequency (AV = 1): 120MHz
- Low Quiescent Current: 1mA Max
- High Slew Rate: 90V/μs
- Input Common Mode Range Includes Both Rails
- Output Swings Rail-to-Rail
- Low Broadband Voltage Noise: 4.2nV/√Hz
- Power-Down Mode: 42μA
- Fast Output Recovery
- Supply Voltage Range: 2.5V to 5.25V
- Input Offset Voltage: 0.5mV Max
- Input Bias Current: 100nA
- Large Output Current: 50mA
- CMRR: 110dB
- Open Loop Gain: 45V/mV
- Operating Temperature Range: –40°C to 125°C
- Single in 6-Pin TSOT-23
- Dual in MS8, 2mm × 2mm Thin DFN,TS0T-23, MS10
- Quad in MS16
Applications
- Low Voltage, High Frequency Signal Processing
- Driving A/D Converters
- Rail-to-Rail Buffer Amplifiers
- Active Filters
- Video Amplifiers
- Fast Current Sensing Amplifiers
- Battery Powered Equipment
