The LT6010CDD op amp combines low noise and high precision input performance with low power consumption and rail-to-rail output swing.
Input offset voltage is trimmed to less than 35µV. The low drift and excellent long-term stability guarantee a high accuracy over temperature and over time. The 110pA maximum input bias current and 120dB minimum voltage gain further maintain this precision over operating conditions.
The LT6010CDD works on any power supply voltage from 2.7V to 36V, and draws only 135µA of supply current on a 5V supply. A power saving shutdown feature reduces supply current to 12µA. The output voltage swings to within 40mV of either supply rail, making the amplifier a good choice for low voltage single supply operation.
The LT6010CDD is fully specified at 5V and ±15V supplies and from –40°C to 85°C. The device is available in SO-8 and space-saving 3mm × 3mm DFN packages. This op amp is also available in dual (LT6011) and quad (LT6012) packages.
Feature
- 35µV Maximum Offset Voltage
- 110pA Maximum Input Bias Current
- 135µA Supply Current
- Rail-to-Rail Output Swing
- 12µA Supply Current in Shutdown
- 120dB Minimum Voltage Gain (VS = ±15V)
- 0.8µV/°C Maximum VOS Drift
- 14nV/√Hz Input Noise Voltage
- 2.7V to ±18V Supply Voltage Operation
- Operating Temperature Range: –40°C to 85°C
- Space Saving 3mm × 3mm DFN Package
Applications
- Thermocouple Amplifiers
- Precision Photo Diode Amplifiers
- Instrumentation Amplifiers
- Battery-Powered Precision Systems
(Picture: Pinout)
