The LT1636CDD op amp operates on all single and split supplies with a total voltage of 2.7V to 44V drawing less than 50µA of quiescent current. The LT1636CDD can be shut down, making the output high impedance and reducing the quiescent current to 4µA. The LT1636CDD has a unique input stage that operates and remains high impedance when above the positive supply. The inputs take 44V both differential and common mode, even when operating on a 3V supply. The output swings to both supplies. Unlike most micropower op amps, the LT1636CDD can drive heavy loads; its rail-to-rail output drives 18mA. The LT1636CDD is unity-gain stable into all capacitive loads up to 10,000pF when a 0.22µF and 150Ω compensation network is used.
The LT1636CDD is reverse supply protected: it draws no current for reverse supply up to 27V. Built-in resistors protect the inputs for faults below the negative supply up to 22V. There is no phase reversal of the output for inputs 5V below VEE or 44V above VEE, independent of VCC.
The LT1636CDD op amp is available in the 8-pin MSOP, PDIP and SO packages. For space limited applications the LT1636CDD available in a 3mm × 3mm × 0.8mm dual fine pitch leadless package (DFN).
Feature
- Rail-to-Rail Input and Output
- Micropower: 50µA IQ, 44V Supply
- Operating Temperature Range: −40°C to 125°C
- Over-The-Top®: Input Common Mode Range Extends 44V Above VEE, Independent of VCC
- Low Input Offset Voltage: 225µV Max
- Specified on 3V, 5V and ±15V Supplies
- High Output Current: 18mA
- Output Shutdown
- Output Drives 10,000pF with Output Compensation
- Reverse Battery Protection to 27V
- High Voltage Gain: 2000V/mV
- High CMRR: 110dB
- 220kHz Gain-Bandwidth Product
- 8-Lead DFN, MSOP, PDIP and SO Packages
Applications
- Battery- or Solar-Powered Systems
- Portable Instrumentation
- Sensor Conditioning
- Supply Current Sensing
- Battery Monitoring
- MUX Amplifiers
- 4mA to 20mA Transmitters
(Picture: Pinout)
