The CAV25160YE-GT3 is EEPROM Serial 16-Kb SPI - Automotive Grade device internally organized as 2048x8 bits. It features a 32-byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are a clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAV25160YE-GT3 device. This device feature software and hardware write protection, including partial as well as full array protection.
Feature
- Automotive Temperature Grade 1 (-40°C to +125°C)
- Allows the use in safety critical application
- 2.5 V to 5.5 V Supply Voltage Range
- Single power supply from 2.5 V to 5.5 V. Functional over the entire temperature range
- SOIC and TSSOP 8-Lead Packages
- Space-Efficient Packaging
- 10 MHz SPI Compatible
- SPI Modes (0,0) & (1,1)
- 16-byte Page Write Buffer
- Selftimed Write Cycle
- Hardware and Software Protection
- Block Write Protection - Protect ¼, ½ or Entire EEPROM Array
- Low Power CMOS Technology
- 1,000,000 Program/Erase Cycles
- 100 Year Data Retention
- Industrial and Extended Temperature Range
- These Devices are Pb-Free, Halogen Free/BFR Free, and RoHS Compliant
Applications
- Door module
- Seat control unit
- Body computer & energy management unit
- Immobilizer unit
- Wiper module
- Fan control unit
- Park assist unit
- Light management unit
- Electronic parking brake
- Engine Start/Stop control unit
- Engine control unit
- ABS/ESP (Electronic Stability Program) Airbag
- Airbag
- Integrated navigation and infotainment systems
- Electric steering control unit, ESL
