■ 30W maximum total output power
■ Up to 5A output current
■ Input voltage range 6V to 36V
■ Output voltage range 0.8V to 6V
■ Efficiency up to 92%
Key Features
■ Integrated shielded inductor
■ Simple PCB layout
■ Frequency synchronization input (650 kHz to 950 kHz)
■ Flexible startup sequencing using external soft-start, tracking and precision enable
■ Protection against inrush currents and faults such as input UVLO and output short circuit
■ – 40°C to 125°C junction temperature range
■ Single exposed pad and standard pinout for easy mounting and manufacturing
■ Fast transient response for powering FPGAs and ASICs
■ Fully enabled for Webench® Power Designer
■ Pin compatible with LMZ22005/LMZ23603/LMZ22003
Applications
■ Point of load conversions from 12V and 24V input rail
■ Time critical projects
■ Space constrained / high thermal requirement applications
■ Negative output voltage applications See AN-2027
Performance Benefits
■ High efficiency reduces system heat generation
■ Complies with EN55022 Class B (Note 5)
■ Low component count, only 5 external components
■ Low output voltage ripple
■ Uses PCB as heat sink, no airflow required
Feature
- Integrated Shielded Inductor
- Simple PCB Layout
- Frequency Synchronization Input (650 kHz to 950 kHz)
- Flexible Start-up Sequencing Using External Soft- Start, Tracking and Precision Enable
- Protection Against Inrush Currents and Faults such as Input UVLO and Output Short Circuit
- Junction Temperature Range –40°C to +125°C
- Single Exposed Pad and Standard Pinout for Easy Mounting and Manufacturing
- Fast Transient Response for Powering FPGAs and ASICs
- Fully Enabled for WEBENCH? Power Designer
- Pin Compatible With LMZ22005/LMZ23603/LMZ22003
- Performance Benefits
- High Efficiency Reduces System Heat Generation
- Tested to EN55022 Class B(1)
- See SNVA473 and Layout for Informationon Device Under Test.
- Vin = 24 V Vo = 3.3 V Io = 5 A
- Low Component Count, only 5 External Components
- Low Output Voltage Ripple
- Uses PCB as Heat Sink, no Airflow Required
- Electrical Specifications
- 30-W Maximum Total Output Power
- Up to 5-A Output Current
- Input Voltage Range 6 V to 36 V
- Output Voltage Range 0.8 V to 6 V
- Efficiency up to 92%
The LMZ23605 SIMPLE SWITCHER? power module is an easy-to-use step-down DC – DC solution capable of driving up to 5-A load. The LMZ23605 is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.
The LMZ23605 can accept an input voltage rail between 6 V and 36 V and can deliver an adjustable and highly accurate output voltage as low as 0.8 V. The LMZ23605 only requires two external resistors and three external capacitors to complete the power solution. The LMZ23605 is a reliable and robust design with the following protection features: thermal shutdown, programmable input undervoltage lockout, output overvoltage protection, short circuit protection, output current limit, and the device allows start-up into a prebiased output. The sync input allows synchronization over the 650- to 950-kHz switching frequency range.
