DESCRIPTION
The LTM@4620A is a complete dual 13A, or single 26A out-put switching mode DC/DC power supply with wider Vourrange and higher efficiency than the LTM4620. Included in the package are the switching controller, power FETs, inductors and all supporting components. Operating from an input voltage range of 4.5V to 16V, the LTM4620A supports two outputs each with an output voltage range of 0.6V to 5.3V, set by a single external resistor. Its high efficiency design delivers up to 13A continuous current for each output. Only a few input and output capacitors are needed.
The device supports frequency synchronization, mul-tiphase operation, Burst Mode? operation and output voltage tracking for supply rail sequencing and has an onboard temperature diode for device temperature mon-itoring. High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrificing stability.
Fault protection features include overvoltage and over-current protection. The power module is offered ina proprietary space saving and thermally enhanced 15mm×15mm×4.41mm LGA package and 15mm ×15mm×5.01mm BGA package. The LTM4620A is available with SnPb(BGA) or RoHS compliant terminal finish.
FEATURES
n Dual 13A or Single 26A Output
n Wide Input Voltage Range: 4.5V to 16V
n Output Voltage Range: 0.6V to 5.3V
n ±1.5% Maximum Total DC Output Error
n Multiphase Current Sharing with Multiple LTM4620As Up to 100A
n Higher Efficiency and Wider VOUT Range Than LTM4620
n Differential Remote Sense Amplifier
n Current Mode Control/Fast Transient Response
n Adjustable Switching Frequency
n Overcurrent Foldback Protection
n Frequency Synchronization
n Internal Temperature Monitor
n Output Overvoltage Protection
n Pin Compatible with the LTM4628 (Dual 8A) and LTM4620 (Dual 13A)
n Thermally Enhanced (15mm × 15mm × 4.41mm) LGA Package and (15mm × 15mm × 5.01mm) BGA Package
APPLICATIONS
n Telecom and Networking Equipment
n Industrial Equipment
(Picture:Pinout / Diagram)
