The ADuM6000 is an isolated DC/DC converter based on the Analog Devices, Inc., iCoupler® technology. The DC/DC converter in this device provides regulated, isolated power in several combinations of input and output voltages as listed in Table 1 on the data sheet.The Analog Devices chip scale transformer iCoupler technology transfers isolated power in this DC/DC converter with up to 31% efficiency. The result is a small form factor, total isolation solution.Higher output power levels are obtained by using the ADuM6000 to augment the power output of the ADuM5401, ADuM5402, ADuM5403, ADuM5404, ADuM520x, and ADuM620x iCouplers with isoPower®.isoPower®uses high frequency switching elements to transfer power through its transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. See the AN-0971 Application Note for board layout recommendations.
Feature
- isoPower integrated, isolated DC/DC converter
- Regulated 5 V or 3.3 V output
- Up to 400 mW output power
- 16-lead SOIC package with >7.6 mm creepage
- High temperature operation: 105°C maximum
- High common-mode transient immunity: >25 kV/μs
- Thermal overload protection
- Safety and regulatory approvalsUL recognition (pending)5000 V rms for 1 minute per UL 1577
- CSA Component Acceptance Notice #5AIEC 60601-1: 125 V rmsIEC 60950-1: 380 V rms
- VDE certificate of conformity (pending)IEC 60747-5-2 (VDE 0884 Part 2):2003-01VIORM = 846 V peak
Applications
- USB peripheral power
- RS-232/RS-422/RS-485 transceiver power
- Industrial field bus power
- Power supply start-up bias
- Industrial PLCs
