JCM1512D12

XP Power’s JCM series of low-power, metal-cased DC-DC converters are aimed at space constrained portable applications. These highly efficient board mounted converters provide either single or dual regulated outputs from an ultra-compact 1 x 1 x 0.39 inch package. Achieving an efficiency of up to 89%, these tiny units are ideal for applications where PCB space for the converter needs to be kept to the minimum and an industry standard package pin-out is required. These products can replace existing 1" x 2" packages thus reducing required board space by 50%. With a 2:1 wide input range, the JCM20 series offers three input ranges of 9-18, 18-36 or 36-75 VDC inputs. Single output models provide +3.3, +5, +12 or +15 VDC, while the duals offer ±5, ±12 or ±15 VDC. All outputs are fully regulated to within ±0.5% over all input and load conditions for the single output models and less than ±1.0% for the dual outputs. Single output models have an output trim that allows adjustment within ±10% of nominal output. Input to output and input/output to case isolation of 1,600 VDC is provided across the range. Able to work in most environments, the JCM can operate at full load from -40°C to +65°C without the need for any additional heatsinking or forced airflow. With derating the JCM can operate up to +100°C. The series features remote on/off control. This can be used to control the output rails or to sequence start-up procedures. All units also feature overvoltage, overload and short circuit protection. XP Power’s JCM series of low-power, metal-cased DC-DC converters are aimed at space-constrained portable applications. These highly efficient board-mounted converters provide either single or dual regulated outputs from an ultra-compact 1 x 1 x 0.39 inch package. Achieving an efficiency of up to 89%, these tiny units are ideal for applications where PCB space for the converter needs to be kept to the minimum and an industry-standard package pin-out is required. These products can replace existing 1" x 2" packages, thus reducing required board space by 50%. With a 2:1 wide input range, the JCM20 series offers three input ranges of 9-18, 18-36 or 36-75 VDC inputs. Single-output models provide +3.3, +5, +12 or +15 VDC, while the duals offer ±5, ±12 or ±15 VDC. All outputs are fully regulated to within ±0.5% over all input and load conditions for the single-output models and less than ±1.0% for the dual outputs. Single-output models have an output trim that allows adjustment within ±10% of nominal output. Input to output and input/output to case isolation of 1,600 VDC is provided across the range. Able to work in most environments, the JCM can operate at full load from -40°C to +65°C without the need for any additional heatsinking or forced airflow. With derating the JCM can operate up to +100°C. The series features remote on/off control. This can be used to control the output rails or to sequence start-up procedures. All units also feature overvoltage, overload and short-circuit protection.