All trademarks are the property of their respective owners.
DescriptionThe TPS40197RGYT is a synchronous buck controller that operates from 4.5 V to 14 V inputsupply nominally. The controller implements voltage-mode control architecture with the switchingfrequency fixed at 520kHz. The higher switching frequency facilitates the use of smaller inductorand output capacitors, thereby providing a compact power-supply solution. An adaptive anti-crossconduction scheme is used to prevent shoot through current in the power FETs.
The TPS40197RGYT integrates the PWM control and 4-bit VID interface in a single chip to allowseamless on-the-fly VID changes with programmable transition rate. It provides a simple powersolution for Smart-Reflex? DSP cores.
Short-circuit detection is done by sensing the voltage drop across the low-side FET whenit is on and comparing it with a user selected threshold of 100 mV, 200 mV or 280 mV. The thresholdis set with a single external resistor connected from COMP to GND. This resistor is sensed atstartup and the selected threshold is latched. Pulse by pulse limiting (to prevent current runaway)is provided by sensing the voltage across the high-side FET when it is on and terminating the cyclewhen the voltage drop rises above a fixed threshold of 550 mV. When the controller senses an outputshort circuit, both FETs are turned off and a timeout period is observed before attempting torestart. This provides limited power dissipation in the event of a sustained fault.
Feature
- Input Voltage Range: 4.5 V to 14 V
- 4-Bit Dynamic VID-On-The-Fly Support
- VID Programmable Output Voltage with Programmable Transition Rate
- Fixed Switching Frequency of 520kHz
- Selectable Low-Side (Three Settings) and Fixed High-Side Thermally CompensatedOvercurrent Protection
- Power Good Indicator
- Internal 5-V Regulator
- Voltage Mode Control
- Internally Fixed 5.5-ms Soft-Start Time
- Prebias Output Safe
- Thermal Shutdown at 140°C
- 16-Pin QFN Package
All trademarks are the property of their respective owners.
DescriptionThe TPS40197 is a synchronous buck controller that operates from 4.5 V to 14 V inputsupply nominally. The controller implements voltage-mode control architecture with the switchingfrequency fixed at 520kHz. The higher switching frequency facilitates the use of smaller inductorand output capacitors, thereby providing a compact power-supply solution. An adaptive anti-crossconduction scheme is used to prevent shoot through current in the power FETs.
The TPS40197 integrates the PWM control and 4-bit VID interface in a single chip to allowseamless on-the-fly VID changes with programmable transition rate. It provides a simple powersolution for Smart-Reflex? DSP cores.
Short-circuit detection is done by sensing the voltage drop across the low-side FET whenit is on and comparing it with a user selected threshold of 100 mV, 200 mV or 280 mV. The thresholdis set with a single external resistor connected from COMP to GND. This resistor is sensed atstartup and the selected threshold is latched. Pulse by pulse limiting (to prevent current runaway)is provided by sensing the voltage across the high-side FET when it is on and terminating the cyclewhen the voltage drop rises above a fixed threshold of 550 mV. When the controller senses an outputshort circuit, both FETs are turned off and a timeout period is observed before attempting torestart. This provides limited power dissipation in the event of a sustained fault.
