MAX6065AEUR+T

The MAX606/MAX607 are the smallest CMOS, step-up DC-DC converters available for flash memory and PC (PCMCIA) cards. They switch at up to 1MHz, permitting the entire circuit to fit in 0.25in2, yet remain under 1.35mm high to fit Type 1, 2, and 3 card standards. These devices operate from a 3V to 5.5V input and provide a ±4% accurate output that is preset to 5V or 12V, or adjustable from VIN to 12.5V. They can provide up to 180mA of output current at 5V. The MAX6065AEUR switches at up to 1MHz and fits Type 1 (thinnest standard) flash memory and PCMCIA cards. It uses a thin, 1.19mm high, 5μH inductor and small, 0.68μF output capacitors. The entire circuit fits in 0.25in2 and is less than 1.35mm high. The MAX607 switches at up to 500kHz, fitting Type 2 and 3 cards, as well as hand-held devices where height requirements are not as critical. It uses less board area than the MAX606, fitting in 0.16in2, but requires 2.5mm of height. It also has a lower no-load supply current than the MAX606. Both devices use a unique control scheme that optimizes efficiency over all input and output voltages. Other features include 1μA logic-controlled shutdown and user-controlled soft-start to minimize inrush currents. The MAX606/MAX607 come in 8-pin μMAX and SO packages. The μMAX package uses half the board area of a standard 8-pin SO and has a maximum height of just 1.11mm.

Feature

Applications