The LTC3851AEMSE-1 is a high performance synchronous step-down switching regulator controller that drives an all N-channel synchronous power MOSFET stage. A constant frequency current mode architecture allows a phase-lockable frequency of up to 750kHz.
OPTI-LOOP compensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. The LTC3851AEMSE-1 features a precision 0.8V reference that is compatible with a wide 4V to 38V input supply range.
The TK/SS pin ramps the output voltage during start-up. Current foldback limits MOSFET heat dissipation during short-circuit conditions. The MODE/PLLIN pin selects among Burst Mode operation, pulse-skipping mode or continuous inductor current mode at light loads and allows the IC to be synchronized to an external clock. The LTC3851AEMSE-1 contains an improved PLL compared to the LTC3851.
The LTC3851A-1 is a version with a power good output signal instead of adjustable current limit.
Features LTC3851Not Recommended For New DesignsLTC3851-1Not Recommended For New DesignsLTC3851AAdjustable Current LimitLTC3851A-1PGOOD OutputFeature
- Wide VIN Range: 4V to 38V Operation
- RSENSE or DCR Current Sensing
- ±1% Output Voltage Accuracy
- Phase-Lockable Fixed Frequency: 250kHz to 750kHz
- Dual N-Channel MOSFET Synchronous Drive
- Very Low Dropout Operation: 99% Duty Cycle
- Adjustable Output Voltage Soft-Start or Tracking
- Output Current Foldback Limiting
- Output Overvoltage Protection
- 5V Internal Regulator
- OPTI-LOOP® Compensation Minimizes COUT
- Selectable Continuous, Pulse-Skipping or Burst Mode® Operation at Light Loads
- Low Shutdown IQ: 20μA
- VOUT Range: 0.8V to 5.5V
- Thermally Enhanced 16-Lead MSOP, 16-Lead Narrow SSOP or 3mm × 3mm QFN Package
Applications
- Automotive Systems
- Telecom Systems
- Industrial Equipment
- Distributed DC Power Systems
(Picture: Pinout)
