LTC3728IUH#PBF

The LTC3728IUH is a dual high performance step-down switching regulator controller that drives all N-channel synchronous power MOSFET stages. A constant-frequency current mode architecture allows phase-lockable frequency of up to 550kHz. Power loss and noise due to the ESR of the input capacitors are minimized by operating the two controller output stages out of phase.

OPTI-LOOP compensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. The precision 0.8V reference and power good output indicator are compatible with future microprocessor generations, and a wide 3.5V to 30V (36V maximum) input supply range encompasses all battery chemistries.

A RUN/SS pin for each controller provides both softstart and optional timed, short-circuit shutdown. Current foldback limits MOSFET dissipation during short-circuit conditions when overcurrent latchoff is disabled. Output overvoltage protection circuitry latches on the bottom MOSFET until VOUT returns to normal. The FCB mode pin can select among Burst Mode, constant-frequency mode and continuous inductor current mode or regulate a secondary winding. The LTC3728IUH includes a power good output pin that indicates when both outputs are within 7.5% of their designed set point.

 Vin RangeVref AccyCurrent Limit Latch Off3.3V LDO AvailableLTC37283.5V to 36V+/-1%YesLTC3728L4.5V to 28V+/-1%YesYesLTC3728LX4.5V to 28V+/- 1.5%YesYesLTC3728L-14.5V to 28V+/- 1.5%Foldback onlyYes

Feature

Applications

(Picture: Pinout)