The LM34936QPWPTQ1 is a synchronous four-switch buck-boost DC/DC controller capable ofregulating the output voltage at, above, or below the input voltage. The LM34936QPWPTQ1 operates over awide input voltage range of 4.2 V to 30 V (42 V absolute maximum) to support a variety ofapplications.
The LM34936QPWPTQ1 employs current-mode control both in buck and boost modes of operation forsuperior load and line regulation. The switching frequency is programmed by an external resistorand can be synchronized to an external clock signal.
The device also features a programmable soft-start function and offers protectionfeatures including cycle-by-cycle current limiting, input undervoltage lockout (UVLO), outputovervoltage protection (OVP), and thermal shutdown. In addition, the LM34936QPWPTQ1 features optionalaverage input or output current limiting, optional spread spectrum to reduce peak EMI, and optionalhiccup mode protection in sustained overload conditions.
Feature
- Single Inductor Buck-Boost Controller for Step-Up/Step-Down DC/DC Conversion
- Wide VIN: 4.2 V (2.5 V with bias) to 30 V (42 V Maximum)
- Flexible VOUT: 0.8 V to 30 V
- VOUT Short Protection
- High Efficiency Buck-Boost Transition
- Adjustable Switching Frequency
- Optional Frequency Sync and Dithering
- Integrated 2-A MOSFET Gate Drivers
- Cycle-by-Cycle Current Limit and Optional Hiccup
- Optional Input or Output Average Current Limiting
- Programmable Input UVLO and Soft-Start
- Power Good and Output Overvoltage Protection
- Available in QFN-28 Package
- Create a Custom Design Using the LM34936 with the WEBENCH Power Designer
