The LTC3789EGN is a high performance buck-boost switching regulator controller that operates from input voltages above, below or equal to the output voltage. The constant-frequency, current mode architecture allows a phase-lockable frequency of up to 600kHz, while an output current feedback loop provides support for battery charging. With a wide 4V to 38V (40V maximum) input and output range and seamless, low noise transitions between operating regions, the LTC3789EGN is ideal for automotive, telecom and battery-powered systems.
The operating mode of the controller is determined through the MODE/PLLIN pin. The MODE/PLLIN pin can select between pulse-skipping mode and forced continuous mode operation and allows the IC to be synchronized to an external clock. Pulse-skipping mode offers high efficiency and low ripple at light loads, while forced continuous mode operates at a constant frequency for noise-sensitive applications.
A PGOOD pin indicates when the output is within 10% of its designed set point. The LTC3789EGN is available in low profile 28-pin 4mm × 5mm QFN and narrow SSOP packages.
Feature
- Single Inductor Architecture Allows VIN Above, Below or Equal to the Regulated VOUT
- Programmable Input or Output Current
- Wide VIN Range: 4V to 38V
- 1% Output Voltage Accuracy: 0.8V < VOUT < 38V
- Synchronous Rectification: Up to 98% Efficiency
- Current Mode Control
- Phase-Lockable Fixed Frequency: 200kHz to 600kHz
- No Reverse Current During Start-Up
- Power Good Output Voltage Monitor
- Internal 5.5V LDO
- Quad N-Channel MOSFET Synchronous Drive
- VOUT Disconnected from VIN During Shutdown
- True Soft-Start and VOUT Short Protection, Even in Boost Mode
- Available in 28-Lead QFN (4mm × 5mm) and 28-Lead SSOP Packages
Applications
- Automotive Systems
- Distributed DC Power Systems
- High Power Battery-Operated Devices
- Industrial Control
(Picture: Pinout)
