The MAX504/MAX515 are low-power, voltage-output, 10-bit digital-to-analog converters (DACs) specified for single +5V power-supply operation. the MAX5041BEAI can also be operated with ±5V supplies. The MAX515 draws only 140μA, and the MAX5041BEAI (with internal reference) draws only 260μA. The MAX515 comes in 8-pin DIP and SO packages, while the MAX5041BEAI comes in 14-pin DIP and SO packages. Both parts have been trimmed for offset voltage, gain, and linearity, so no further adjustment is necessary. The MAX515's buffer is fixed at a gain of 2. The MAX504's internal op amp may be configured for a gain of 1 or 2, as well as for unipolar or bipolar output voltages. The MAX5041BEAI can also be used as a four-quadrant multiplier without external resistors or op amps. For parallel data inputs, see the MAX503 data sheet. For a hardware and software compatible 12-bit upgrade, refer to the MAX531/MAX538/MAX539 data sheet.
Feature
- Operate from Single +5V Supply
- Buffered Voltage Output
- Internal 2.048V Reference (MAX504)
- 140μA Supply Current (MAX515)
- INL = ±1/2LSB (max)
- Guaranteed Monotonic Over Temperature
- Flexible Output Ranges:
- 0V to VDD (MAX504/MAX515)
- VSS to VDD (MAX504)
- 8-Pin SO/DIP (MAX515
- Power-On Reset
- Serial Data Output for Daisy-Chaining
Applications
- Audio Systems
- Battery-Operated/Remote Industrial Controls
- Battery-Powered Test Instruments
- Digital Gain and Offset Control
- Machine- and Motion-Control Devices
