The LTC3829IUHF is a high performance 3-phase single output synchronous step-down DC/DC switching controller that drives all N‑channel synchronous power MOSFET stages. A constant frequency current mode architecture allows a phase-lockable frequency of up to 770kHz. Power loss and noise due to ESR of the input capacitors are minimized by operating the three controller output stages out of phase.
The LTC3829IUHF can be configured for 6-phase operation, has DCR temperature compensation, and output foldback current limiting. This device features a precision 0.6V reference and a power good indicator.
Light load efficiency is optimized by using a choice of output Stage Shedding or Burst Mode operation. A differential amplifier provides true remote sensing of the output voltage at the point of load.
The LTC3829IUHF is available in both low profile 38-pin 5mm × 7mm QFN and Exposed Pad FE packages.
Feature
- Optional Nonlinear Control for Fast Response
- ±0.75%, 0.6V Reference Accuracy
- PWM, Stage Shedding™ or Burst Mode® Operation
- High Efficiency: Up to 95%
- RSENSE or DCR Current Sensing
- Programmable DCR Temperature Compensation
- Phase-Lockable Fixed Frequency: 250kHz to 770kHz
- True Remote Sense Differential Amplifier
- Programmable Active Voltage Positioning (AVP)
- Triple N-Channel MOSFET Synchronous Drive
- Wide VIN Range: 4.5V to 38V Operation
- VOUT Range: 0.6V to 5V without Diffamp
- VOUT Range: 0.6V to 3.3V with Diffamp
- Clock Input and Output for 6-Phase Operation
- Adjustable Soft-Start or VOUT Tracking
- 38-Pin (5mm × 7mm) QFN and FE Packages
Applications
- Notebook and Palmtop Computers
- Telecom Systems
- Portable Instruments
- DC Power Distribution Systems
(Picture: Pinout)
