The LTM8001MPY#PBF is a 36VIN, 5A step-down μModule® (power module) regulator with a 5-output configurable LDO array. Operating over an input voltage range of 6V to 36V, the LTM8001MPY#PBF buck regulator supports an output voltage range of 1.2V to 24V. Following the buck regulator is an array of five 1.1A linear regulators whose outputs may be connected in parallel to accommodate a wide variety of load combinations. Three of these LDOs are tied to the output of the buck regulator, while the other two are tied together to an undedicated input.
The low profile package (3.42mm) enables utilization of unused space on the bottom of PC boards for high density point of load regulation. The LTM8001MPY#PBF is packaged in a thermally enhanced, compact (15mm × 15mm) and low profile (3.42mm) overmolded ball grid array (BGA) package suitable for automated assembly by standard surface mount equipment. The LTM8001MPY#PBF is available with SnPb (BGA) or RoHS compliant terminal finish.
Feature
- Complete Step-Down Switch Mode Power Supply with Configurable Array of Five LDOs
- Step-Down Switching Power Supply– Adjustable 10% Accurate Output Current Limit–Constant-Current, Constant-Voltage Operation– Wide Input Voltage Range: 6V to 36V– 1.2V to 24V Output Voltage
- Configurable Output LDO Array– Five 1.1A Parallelable Outputs– Outputs Adjustable from 0V to 24V– Low Output Noise: 90μVRMS (100Hz to 1MHz)
- 15mm × 15mm × 3.42mm Surface Mount BGA Package
Applications
- FPGA, DSP, ASIC and Microprocessor Supplies
- Servers and Storage Devices
- RF Transceivers
