All trademarks are the property of their respective owners.
DescriptionThis automotive AEC-Q100 qualified singlepositive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V VCCoperation.
When data at the data (D) input meets the setup time requirement, the data is transferredto the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltagelevel and is not directly related to the rise time of the clock pulse. Following the hold-timeinterval, data at the D input can be changed without affecting the level at the output.
This device is fully specified for partial-power-down applications usingIoff. The Ioff circuitry disables the outputs,preventing damaging current backflow through the device when it is powered down.
Feature
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- ±4000-V Human-Body Model (HBM) ESD Classification Level3A
- ±1000-V Charged-Device Model (CDM) ESD ClassificationLevel C5
- Supports 5-VVCC Operation
- Inputs Accept Voltages to 5.5 V
- Supports Down Translation to VCC
- Maxtpd of 6 ns at 3.3 V and 50 pF load
- Low Power Consumption, 10-μA Max ICC
- ±24-mA Output Drive at 3.3 V
- Ioff supports Partial-Power-Down Mode and Back-DriveProtection
All trademarks are the property of their respective owners.
DescriptionThis automotive AEC-Q100 qualified singlepositive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V VCCoperation.
When data at the data (D) input meets the setup time requirement, the data is transferredto the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltagelevel and is not directly related to the rise time of the clock pulse. Following the hold-timeinterval, data at the D input can be changed without affecting the level at the output.
This device is fully specified for partial-power-down applications usingIoff. The Ioff circuitry disables the outputs,preventing damaging current backflow through the device when it is powered down.
