The TPS53119RGTR device is a small-sized single buck controller with adaptive ON-time D-CAPmode control. The device is designed for low output voltage, high current, PC system power rail andsimilar point-of-load (POL) power supplies in digital consumer products. The small package andminimal pin count save space on the PCB, while the dedicated EN pin and pre-set frequencyselections simplify the power supply design. The skip mode at light load conditions, strong gatedrivers, and low-side FET RDS(on) current sensing supports low loss and highefficiency over a broad load range. The conversion input voltage (high-side FET drain voltage)range is between 4.5 V and 25 V, and the output voltage range is between 0.6 V and 5.5 V. TheTPS53119RGTR is available in a 16-pin VQFN package specified from –20°C to +85°C.
Feature
- Conversion input voltage range: 3 V to 26 V
- VDD input voltage range: 4.5 V to 25 V
- Output voltage range: 0.6 V to 5.5 V
- Built-In 0.6-V (±0.8%) reference
- Built-In LDO linear voltage regulator
- Auto-skip Eco-Mode for light-load efficiency
- D-CAP mode with 100-ns load-step response
- Adaptive ON-time control architecture with 8 selectable frequency settings
- 4700-ppm/°C RDS(on) current sensing
- 0.7-ms, 1.4-ms, 2.8-ms and 5.6-ms Selectable internal voltage servo soft start
- Pre-charged start-up capability
- Built-in output discharge
- Open-drain power-good output
- Integrated boost switch
- Built-In OVP/UVP/OCP
- Thermal shutdown (non-latch)
- 3-mm × 3-mm 16-Pin VQFN (RGT) package
- Create a custom design using the TPS53119 with the WEBENCH Power Designer
