The LTC3606BIDD is an 800mA monolithic synchronous buck regulator using a constant frequency current mode architecture.
The input supply voltage range is 2.5V to 5.5V, making it ideal for Li-Ion and USB powered applications. 100% duty cycle capability provides low dropout operation, extending the run time in battery-operated systems. Low output voltages are supported with the 0.6V feedback reference voltage. The LTC3606BIDD can supply 800mA output current.
The LTC3606B’s programmable average input current limit is ideal for USB applications and for point-of-load power supplies because the LTC3606B’s limited input current will still allow its output to deliver high peak load currents without collapsing the input supply. The operating frequency is internally set at 2.25MHz allowing the use of small surface mount inductors. Internal soft-start reduces in-rush current during start-up. The LTC3606BIDD is available in an 8-Lead 3mm × 3mm DFN package.
Feature
- Programmable Average Input Current Limit: ±5% Accuracy
- Step-Down Output: Up to 96% Efficiency
- Low Noise Pulse-Skipping Operation at Light Loads
- Input Voltage Range: 2.5V to 5.5V
- Output Voltage Range: 0.6V to 5V
- 2.25MHz Constant-Frequency Operation
- Power Good Output Voltage Monitor
- Low Dropout Operation: 100% Duty Cycle
- Internal Soft-Start
- Current Mode Operation for Excellent Line and Load Transient Response
- ±2% Output Voltage Accuracy
- Short-Circuit Protected
- Shutdown Current ≤ 1μA
- Available in Small Thermally Enhanced 8-Lead 3mm × 3mm DFN Package
Applications
- High Peak Load Current Applications
- USB Powered Devices
- Supercapacitor Charging
- Radio Transmitters and Other Handheld Devices
(Picture: Pinout)
