The DS25CP104ATSQ/NOPB is a 3.125Gbps 4x4 LVDS Crosspoint Switch optimized for high speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. The non-blocking architecture allows connections of any input to any output or outputs. The switch configuration can be accomplished via external pins or the System Management Bus (SMBus) interface. The DS25CP104ATSQ/NOPB feature four levels (off, low, medium, high) of transmit pre-emphasis (PE) and four levels (off, low, medium, high) of receive equalization (EQ) settable via the SMBus interface. Off and medium PE levels and off and low EQ levels are settable with the external pins. In addition, the SMBus circuitry enables the loss of signal (LOS) monitors that can inform a system of the presence of an open inputs condition (e.g. disconnected cable).
Feature
- DC - 3.125 Gbps Low Jitter, Low Skew, Low Power Operation
- Pin and SMBus Configurable, Fully Differential, Non-Blocking Architecture
- Pin (Two Levels) and SMBus (Four Levels) Selectable Pre-Emphasis and Equalization Eliminate ISI Jitter
- Wide Input Common Mode Range Enables Easy Interface to CML and LVPECL Drivers
- LOS Circuitry Detects Open Inputs Fault Condition
- On-Chip 100? Input and Output Termination Minimizes Insertion and Return Losses, Reduces Component Count, Minimizes Board Space The DS25CP114 Eliminates the On-Chip Input Termination for Added Design Flexibility.
- 8 kV ESD on LVDS I/O Pins Protects Adjoining Components
- Small 6 mm x 6 mm WQFN-40 Space Saving Package
All trademarks are the property of their respective owners.
Description
