SN74AVCH16T245GR

• VCC Isolation Feature – If Either VCC Input is at GND, Both Ports are in the High-Impedance State
• Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage
• Overvoltage-Tolerant Inputs and Outputs Allow Mixed Voltage-Mode Data Communications
• Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.2 V to 3.6 V Power-Supply Range
• Ioff Supports Partial-Power-Down Mode Operation
• I/Os are 4.6 V Tolerant
• Bus Hold on Data Inputs Eliminates the Need for External Pullup and Pulldown Resistors
• Maximum Data Rates
  • 380 Mbps (1.8 V to 3.3 V Level-Shifting)
  • 200 Mbps (<1.8 V to 3.3 V Level-Shifting)
  • 200 Mbps (Level-Shifting to 2.5 V or 1.8 V)
  • 150 Mbps (Level-Shifting to 1.5 V)
  • 100 Mbps (Level-Shifting to 1.2 V)
• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• ESD Protection Exceeds JESD 22
  • 8000-V Human-Body Model (A114-A)
  • 200-V Machine Model (A115-A)
  • 1000-V Charged-Device Model (C101)

This 16-bit noninverting bus transceiver uses two separate configurable power-supply rails. The SN74AVCH16T245 device is optimized to operate with VCCA/VCCB set at 1.4 V to 3.6 V. The device is operational with VCCA/VCCB as low as 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 V to 3.6 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, and 3.3-V voltage nodes.

The SN74AVCH16T245 control pins (1DIR, 2DIR, 1OE) input can be used to disable the outputs so the buses are effectively isolated.