The SN74AVCA406EZQSR is a transceiver for interfacing microprocessors with MultiMediaCards (MMCs) andsecure digital (SD) cards.
Two supply-voltage pins allow the A-port and B-port input switching thresholds to be configured separately. The A port is designed to track VCCA, while the B port is designed to track VCCB. VCCA and VCCB can accept any supplyvoltage from 1.2 V to 3.6 V.
If either VCC is switched off (VCCA = 0 V and/or VCCB = 0 V), all outputs are placed in the high-impedance state to conserve power.
The SN74AVCA406EZQSR enables system designers to easily interface low-voltage microprocessors to different memory cards operating at higher voltages.
Memory card standards recommend high ESD protection for devices that connect directly to the external memory card. To meet this need, the SN74AVCA406EZQSR incorporates ±15-kV Air-Gap Discharge and ±8-kV Contact Discharge protection on the card side.
The SN74AVCA406EZQSR is available in two 0.5-mm-pitch ball grid array (BGA) packages. The 20-ball package has dimensions of 3 mm × 2.5 mm, and the 24-ball package measures 3 mm ×3 mm. Memory cards are widely used in mobile phones, PDAs, digital cameras, personal media players, camcorders, set-top boxes, etc. Low static power consumption and small package size make the SN74AVCA406EZQSR an ideal choice for these applications.
Feature
- Transceiver for Memory Card Interface [MultiMediaCard
(MMC) andSecure Digital (SD) Compliant Products] - Configurable I/O Switching Levels With Dual-Supply Pins
Operating Over Full 1.2-V to 3.6-V Power-Supply Range - Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection
- ±8-kV Contact Discharge
- ±15-kV Air-Gap Discharge
- EMI Filtering
- Integrated Pullup and Pulldown Resistors on Card-Side I/Os per
SD Specification - ZQS Package Has 100-k Pullup Resistors Via WP and CD Pins
