BD95500MUV-E2 is a switching regulator with high output current (up to 6A) which can achieve low output voltage (0.7V to 5.0V) from a wide input voltage range (3V to 20V). High efficiency for the switching regulator can be realized by utilizing an internal N-MOSFET power transistor. A new technology called H3Reg™ is a Rohm proprietary control method to realize ultra high transient response against load change. SLLM (Simple Light Load Mode) technology is also integrated to improve efficiency in light load mode, providing high efficiency over a wide load range. For protection and ease of use, the soft start function, variable frequency function, short circuit protection function with timer latch, over voltage protection function, and power good function are all built in. This switching regulator is specially designed for sets of various kinds.
Feature
- Integrated low ON resistance N-MOSFET (TYP. 50mΩ)
- H3Reg™ DC / DC converter controller
- Adjustable Simple Light Load Mode (SLLM), and forced continuous mode
- Thermal Shut Down (TSD), Under Voltage Lockout (UVLO), Adjustable Over Current Protection (OCP),Over Voltage Protection (OVP), Short Circuit Protection(SCP) built-in
- Soft start function to minimize rush current during startup
- Adjustable switching frequency (f=200kHz to 600kHz)
- Built-in output discharge function
- Tracking Function
- Integrated boot strap diode
- Power Good function
