The SN74AVC2T872YFPR is a 2-bit voltage level translator optimized for use in interchip USB (IC-USB) applications.VCCA and VCCB can each operate over the full range of 1.1 V to 3.6 V.The device has been designed to maintain crossover skew to be less than 1 ns.Each B-port has an integrated 120-k pulldown resistor that can be enabled and disabled using the PD_EN control signal.If VCCB = 0 V, the A-port I/Os are disabled (Hi-Z) and the B-port I/Os are held to GND through the 120-k resistors.If VCCA = 0 V, the A-port and B-port I/Os are disabled (Hi-Z).
Feature
- VCCA, VCCB Supply Voltage: 1.1 V to 3.6 V
- When VCCB = 0 V, A-Port is Disabled and B-Port is Held at GND Through 120-k Pulldown
- Crossover Skew of <1 ns
- Meets All Requirements of the IC-USB Standard
- Small Package: 0.4 mm pitch WCSP (1.2 mm × 1.6 mm)
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance
- A-Port (Host Side)
- 2000-V Human-Body Model
- 1000-V Charged-Device Model
- B-Port (Peripheral Side)
- 8000-V Contact Discharge
- 15000-V Air-Gap Discharge
- A-Port (Host Side)
The SN74AVC2T872 is a 2-bit voltage level translator optimized for use in interchip USB (IC-USB) applications.VCCA and VCCB can each operate over the full range of 1.1 V to 3.6 V.The device has been designed to maintain crossover skew to be less than 1 ns.Each B-port has an integrated 120-k pulldown resistor that can be enabled and disabled using the PD_EN control signal.If VCCB = 0 V, the A-port I/Os are disabled (Hi-Z) and the B-port I/Os are held to GND through the 120-k resistors.If VCCA = 0 V, the A-port and B-port I/Os are disabled (Hi-Z).
