The receive inputs provide programmable equalization with nine settings to compensate for up to 30 in. of FR4 and programmable pre-emphasis with seven settings to compensate for up to 30 in. of FR4 at 4.25 Gbps.
The ADN4600ACPZ-R7 nonblocking switch core implements an 8 × 8 crossbar and supports independent channel switching through the I2C control interface. Every channel implements an asynchronous path supporting NRZ data rates from dc to 4.25 Gbps. Each channel is fully independent of other channels. The ADN4600ACPZ-R7 has low latency and very low channel-to-channel skew.
The main application for the ADN4600ACPZ-R7 is to support switching on the backplane, line card, or cable interface sides of serial links.
The ADN4600ACPZ-R7 is packaged in a 9 mm × 9 mm, 64-lead LFCSP package and operates from −40°C to +85°C.
Feature
- Full 8 × 8 crossbar connectivity
- Fully buffered signal path supports multicast and broadcast operation
- Optimized for dc to 4.25 Gbps data
- Programmable receive equalization
- Compensates for up to 30 in. of FR4 @ 4.25 Gbps
- Programmable transmit pre-emphasis/de-emphasis
- Compensates for up to 30 in. of FR4 @ 4.25 Gbps
- Flexible 1.8 V to 3.3 V core supply
- Per lane positive/negative (P/N) pair inversion for routing ease
- Low power: 125 mW/channel at 4.25 Gbps
- DC- or ac-coupled differential CML inputs
- Programmable CML output levels
- 50 Ω on-chip termination
- −40°C to +85°C temperature range operation
- Supports 8b10b, scrambled or uncoded nonreturn-to-zero (NRZ) data
- I2C control interface
- Package: 64-lead LFCSP
Applications
- 1×, 2×, 4× FibreChannel
- XAUI
- Gigabit Ethernet over backplane
- 10GBase-CX4
- InfiniBand®
- 50 Ω cables
(Picture: Pinout)
