The PCA9306DCURG4 device is a dual bidirectional I2C and SMBusvoltage-level translator with an enable (EN) input, and is operational from 1.2-V to 3.3-VVREF1 and 1.8-V to 5.5-V VREF2.
The PCA9306DCURG4 device allows bidirectional voltage translations between 1.2 V and 5 V,without the use of a direction pin. The low ON-state resistance (RON) of theswitch allows connections to be made with minimal propagation delay. When EN is high, thetranslator switch is ON, and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O,respectively, allowing bidirectional data flow between ports. When EN is low, the translator switchis off, and a high-impedance state exists between ports.
In addition to voltage translation, the PCA9306DCURG4 device can be used to isolate a 400-kHzbus from a 100-kHz bus by controlling the EN pin to disconnect theslower bus during fast-mode communication.
Feature
- 2-Bit bidirectional translator for SDA and SCL lines in mixed-modeI2C Applications
- I2C and SMBus Compatible
- Less than 1.5-ns Maximum Propagation Delay to Accommodate Standard-mode andFast-mode I2C Devices and Multiple Masters
- Allows Voltage-level Translation Between
- 1.2-V VREF1 and 1.8-V, 2.5-V, 3.3-V,or 5-V VREF2
- 1.8-V VREF1 and 2.5-V, 3.3-V, or 5-VVREF2
- 2.5-V VREF1 and 3.3-V or 5-VVREF2
- 3.3-V VREF1 and 5-V VREF2
- Provides Bidirectional Voltage Translation with no Direction Pin
- Low 3.5-Ω ON-state ResistanceBetween Input and Output Ports Provides Less SignalDistortion
- Open-drain I2C I/O ports (SCL1, SDA1, SCL2, andSDA2)
- 5-V Tolerant I2C I/O Ports to Support Mixed-mode SignalOperation
- High-impedance SCL1, SDA1, SCL2, and SDA2 pins for EN = Low
- Lockup-free Operation for Isolation when EN=Low
- Flow-through Pinout for Ease of Printed-circuit-board Trace Routing
- Latch-up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 1000-V Charged-Device Model (C101)
All trademarks are the property of their respective owners.
