DESCRIPTION
The SY10/100EL16V are differential receivers. The devices are functionally equivalent to the E116 devices, with higher performance capabilities. With output transition times significantly faster than the E116, the EL16V is ideally suited for interfacing with high-frequency sources.
The EL16V provides a VsB output for either single ended use or as a DC bias for AC coupling to the device. The VBB pin should be used only as a bias for the EL16V as its current sink/source capability is limited. Whenever used, the VsB pin should be bypassed to ground via a 0.01uF capacitor.
Under open input conditions(pulled to VEE), internal input clamps will force the Q output LOW.
FEATURES
■3.3V and 5V power supply options
■250ps propagation delay
■High bandwidth output transitions
■Internal 75K2 input pull-down resistors
■Replaces SY10/100EL16
■Improved output waveform characteristics
■Available in 8-pin (3x3mm) MSOP and SOIC package
Feature
- 3.3V and 5V power supply options
- 250ps propagation delay
- High bandwidth output transitions
- Internal 75KΩ input pull-down resistors
- Replaces SY10/100EL16
- Improved output waveform characteristics
- Available in 8-pin (3mm x 3mm) MSOP and SOIC package
(Picture:Pinout / Diagram)
