The CAT25512VI-GT3 is a EEPROM Serial 512-Kb SPI device internally organized as 64kx8 bits. This features a 128-byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAT25512VI-GT3 device. The device features software and hardware write protection, including partial as well as full array protection.On-Chip ECC (Error Correction Code) makes the device suitable for high reliability applications.
Feature
- 1.8 V to 5.5 V Supply Voltage Range
- Single power supply from 1.8V to 5.5V: allows multiple applications / various VCC values using the same device.
- SPI Modes (0,0) & (1,1)
- SPI interface protocol / industry standard; 20MHz clock enables faster operation; High Reliability
- SOIC, TSSOP 8-lead and UDFN 8-pad Packages
- Space-eficient packaging
- 20 MHz SPI Compatible
- 128-byte Page Write Buffer
- Additional Identification Page with Permanent Write Protection
- Self-timed Write Cycle
- Hardware and Software Protection
- Block Write Protection - Protect 1/4, 1/2 or Entire EEPROM Array
- Low Power CMOS Technology
- 1,000,000 Program/Erase Cycles
- 100 Year Data Retention
- Industrial Temperature Range
- This Device is Pb-Free, Halogen Free/BFR Free, and RoHS Compliant
