The SST25VF010A-33-4C-SAE is a SPI Serial Flash Memory with SST proprietary, high performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunnelling injector attain better reliability and manufacturability compared with alternate approaches. The SST25VF010A-33-4C-SAE device significantly improves performance, while lowering power consumption. The total energy consumed is a function of the applied voltage, current and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies. The SST25VF010A-33-4C-SAE device operates with a single 2.7 to 3.6V power supply.
Feature
- Serial interface architecture - SPI compatible of mode 0 and mode 3
- Low power consumption - Active read current of 7mA (typical), standby current of 8µA (typical)
- Flexible erase capability - Uniform 4kB sectors and uniform 32kB overlay blocks
- Fast erase and byte-program
- Auto Address Increment (AAI) programming
- Superior reliability
- Flexible erase capability
- End-of-write detection - Software status
- Hold pin (HOLD#) - Suspends a serial sequence to the memory without deselecting the device
- Write protection (WP#) - Enables/disables the lock-down function of the status register
- Software write protection - Write protection through Block-Protection bits in status register
