Features
• Max. Clock 20 MHz
• Low-Power CMOS Technology:
- Read Current: 3 mA at 1 MHz
- Standby Current: 4 μA Max. at +85°C
• 8192 x 8-bit Organization
• 32-Byte Page
• HOLD pin
• Flexible Operating modes:
- Byte read and write
- Page mode (32 Byte Page) - Sequential mode
• Sequential Read/Write
• High Reliability
• Temperature Ranges Supported:
- Industrial (I): -40°C to +85°C
- Automotive (E):-40°C to+125°C
Description
The Microchip Technology Inc. 23X640 are 64 Kbit Serial SRAM devices. The memory is accessed via a simple Serial Peripheral Interface (SPI) compatible serial bus. The bus signals required are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a Chip Select (CS) input.
Communication to the device can be paused via the hold pin (HOLD). While the device is paused, transitions on its inputs will be ignored, with the exception of Chip Select, allowing the host to service higher priority interrupts.
The 23X640 is available in standard packages including 8-lead PDIP and SOIC, and advanced packaging including 8-lead TSSOP.
Feature
- 16MHz Maximum clock
- Low-power CMOS technology
- 3mA at 1MHz Read current
- 4µA at 3.6V Maximum standby current
- 8192 x 8-bit organization
- 32-byte page
- Flexible operating modes - byte read and write, page mode (32-byte page), sequential mode
- Sequential read/write
- High reliability
(Picture:Pinout / Diagram)
